Modern technologies for success

Using the best rubber profiles, you'll get a top-quality packaging and satisfied customers.

Main-image

Would you like to get the best results in the production of corrugated cardboard packaging? Well, you've come to the right place!

PerForm Solutions was founded by a young and ambitious team unhappy with the quality supplier service in today's cardboard and corrugated board industry. Outdated solutions, worn recommendations, weeks long waiting for response or delivery – it's not about us! Your development is our aspiration.You'll not notice any geographical or chronological gap between us. Your orders will be timely, recommendations promp, and materials – top quality.

"Your time and profit are valuable to us, therefore we offer not just consumables but comprehensive solutions for your production problems. Please contact us any time and way at your convenience to get advice or an expert opinion or to order consumables. We care about our good reputation and we're always ready to help you overcome technological troubles using our experience and expertise of our partners and consultants."

Quality

"High quality is our rule. There aren't not just words. It's our mission. We improve constantly, leaving no room for coincidence. We follow this principle everything we do – from the delivery of materials to their use at any production stage."

Reliability

We meet our commitments fully and with the agreed timeline. Our company treats customer needs in a responsible manner. We make sure that the necessary consumables are well-stocked at our werehouses and delivered timely. Timeliness and reilability are key in our business. We are ready to hold financial responsibility for observing all contractual terms.

Professionalism

We are constantly improving our skills and expertise, developing new efficient solutions.With its solid experiance and knowledge, our team is a true value that can guarantee the best results.


Join us, and we'll do our best to meet your needs in the shortest possible time, so your business could thrive.

Our plan for September-December 2021

Daily hard work of the PerForm experts gives results, increasing the number of satisfied clients.

New customers

New projects

Hours of support

24/7

Support

We offer materials for die cutting tools

PerForm Solutions offers up-dated top-quality exclusive materials. Developed as a result of our own and our partners' research over the past three decades, they're highly acclaimed among Europian converters. Why should you choose us as your supplier?

Fast shipment

You are eligible for the next day shipping provided that orders are planned for a month ahead.

Relevance

Nowadays raw material combinations will help achieve the necessary operating characteristics of your die cutting tools.

A variety of configurations

We are flexible in the customization of shapes, hardness, and color of profiles to ensure the best outcome.

Stock availability

Core rubber profiles are always well-stocked at our warehouse in Poland.

Reliability

We keep financial responsibility for supply disruption. You can be fully rely on our cooperation.

Convenience

"We offer customized corporate labeling of profiles. Make your tools special. Minimum order quantities are open to negatiation."

Production

Production and maintanance of top-quality die cutting tools depend on the right choice of ejection materials. Good cutting is all about clean cuts, neat creases, and proper waste removal. Our customers take great care in selecting consumables for their productin, and they're proud about the great cutting they get with the same level of equipment productivity. It is very crusial to have the die cutting process controlled. However, when working with corrugated board, there might be crushing, tearing, or cracking in the upper layer along the creasing line. For this reason, ejection materials should perform a range of important functions, including:

  1. pushing the carton or corrugated board out of the cutting blades and the die cutting tool .
  2. fixing/holding a sheet of material inside the cutting blades of the diecutting tool. The reason is that many forces influence the material in the process of die cutting, and this might lead to uneven cutting, tearing of the upper layer of corrugated board, crushing on creasing area, and destruction of blank nicks.
  3. flattening and balancing of a tool pressure
  • All products
  • Profile A
  • Profile B
  • Profile C
  • Profile D
  • Profile E
  • Profile F
  • Profile G
Profile A1
Profile A2
Profile B1
Profile B2
Profile C1
Profile C2
Profile C3
Profile D1
Profile D2
Profile D3
Profile E1
Profile E2
Profile F1
Profile G1
Profile G2

OUR TEAM

Our team is a pool of talanted professionals united by a common goal and values. Each of our employees is a vital part of our company, contributing to it's growth and success. We are commited to our customers and partners, eager to save their time and money by completing our tasks efficiently and on time.

Photo team-1Photo team-1
Оleksandr Lystsev
Chairman of the board and co-founder
Photo team-3Photo team-3
Maria Mykolaychuk
Founder

PerForm Solutions guarantees not only high-quality packaging manufacture, but also relible and efficient cooperation. Our company supplies ejection materials for die cutting tools, used in cardboard and corrugated board packaging production. We offer a full range of services: from the consultations about the best choice of ejection material to the shipment of these materials, readily available at our warehouses, in the shortest possible time. Our production engeneers work hard to ensure the expected outcome – top-quality cardbord packaging in a scheduled time. We supply orders of various size, from minimal package to wholesale lots.

Our history just started in 2021 when we decided to set up a company that will provide top-quality products for a reasonable price and with perfect service. Taken longer, these tree factors will satisfy every customer. Even though we faced quite a few hardships along the way, we didn't give up on our goal to become real profesionals. We are confident that our expertise and dedication to our business will help us earn your trust, no matter who you are - the largest die shop on the continent or a small company, shipping readymade packaging to their customers every day. Collaboration with you will help us improve and continue to offer only the best materials and service.

A wide range of products and top-notch service can solve any problem and fit a project of any complexity. Our supply program proves yet again that details matter, they save your time and resourses, ensure that the final product is relible, and guarantee customer's safety. Our company fully controls the process of production and distribution meeting the highest quality standarts. Our goods are being tested at all stages, from development to delivery, so we are confident that our goods match necessary characteristics. We always follow our philosophy: high speed, top quality and perfect understanding of customer needs.

PerForm Solutions offers not only consumables but a range of services to solve production issues and ensure continuous of technological process of a cardboard and corrugated board converting. As our customers and partners, you can always contact us for help, advice or consultation at any convinient time. We are always ready to help solve technological troubles as we have experience in industry and closely cooperate with our partners, consultants and well-established manufacturers. Professional consultation is a guarantee of a properly made order and excellent result.

We are shipping our products across Europe, all the way from Ukraine to Norway. We offer convenient delivery options: ex works Przemysl (Poland) or door-to-door delivery. We guarantee that goods ordered will be readily available at the warehouse and shipped in time. Time is the most valuable resource. A satisfied and happy customer, who is not worried about timely delivery of their order, can focus on more important things instead. That's why we do our best to provide a full range of services and remain open to your questions and wishes.

Profile A1
Profile A1
Profile A1

Specifications:

  • Hardness:
    40, 50 and 60 units by Shore A.
  • Dimentions:
    9.5х9.5 mm, 10.0х10.0 mm, 10.5х10.5 mm.
  • Supplied in rolls of 30m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a specially deleloped rubber profile A1, its usage neutralizes the ruin and cracking of the upper layer of corrugated board on the creasing line by compression of the material and brining to even compressed state. A profile A1 provides definite creasing line creation and decreases a material resistence during folding.

We recommend to use on corrugated board if diecutting tool has perforating or crease/cutting rules.

Attach the profile to the die cutting tool surface against or in 1 mm distance to the perforating or crease/cutting rules. Dual usage is possible – chamfer up or side-on.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will advise and supply all you need as soon as possible.

Profile A2
Profile A2
Profile A2

Specifications:

  • Hardness:
    40, 50 and 60 units by Shore A.
  • Dimentions:
    9.5х9.5 mm, 10.0х10.0 mm, 10.5х10.5 mm.
  • Supplied in rolls of 30m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer rubber profile A2, the modification of profile A1. It helps neutralize the destruction and cracking of the upper layer of corrugated board alone the creasing line by compression the material and brining it to the state of consistent compression. Profile A2 helps create clear creasing line and reduce material resistence during folding.

We recommend using when working with corrugated board if the die cutting tool has perforating or crease/cutting rules.

Attach the profile to the surface of the die cutting tool close to or 1 mm distance from the perforating or crease/cutting rules. Dual usage is possible – chamfer up or side-on.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will advise and supply all you need as soon as possible.

Profile B1
Profile B1
Profile B1

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    6.5х8.0 mm, 7.0х9.0 mm, 8.0х10.0 mm.
  • Supplied in rolls of 50 m and boxes of 100 m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom-designed rubber profile B1. It helps reduce the range of issues arising during the die-сutting of recycled and short-fiber board, including excess crushing and breaking of the upper layer of corrugated cardboard.

We recommend using it when working with corrugated cardboard and cardboard close to the cutting rules in the nicking areas, and along the entire length of creasing lines. Typically, the the profile should be 0.5-1.0 mm lower then creasing rule. If cutting rules are used, the profile should be 1.2-2.2 mm higher then the cutting rule, depending on the thickness of cardboard.

Attach the profile to the surface of the die cutting tool close to the cutting or creasing rules.

The usage of PerForm profiles allows you to:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile B2
Profile B2
Profile B2

Specifications:

  • Hardness:
    20, 40 and 50 units by Shore A.
  • Dimentions:
    7.0х12.5 mm, 6.5х7.5 mm.
  • Supplied in rolls of 30m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer rubber profile B2, modification of the profile B1. It helps reduce the range of issues, arising during die сutting of recycled and short-fiber cardboard. It ensures better sheet fixing, and no tearings of an upper layer of a three-layer corrugated board. It can also be used in the narrow areas instead of E1 profiles.

We recommend using it when working with a regular recycled cardboard and corrugated cardboard close to cutting rules in the nicking areas, and along the entire length of the creasing rules. Typically, the the profile should be 0.5-1.0 mm lower than the creasing ruler. In specific cases the heigh of profile should be calculated as the difference between the height of the creasing line and thickness of compressed cardboard or corrugated board.

Attach the profile to the surface of die cutting tool close to the cutting or creasing rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile C1
Profile C1
Profile C1

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    7.3х3.0 mm, 7.3х4.0 mm, 7.3х5.0 mm, 7.3х6.0 mm, 7.3х8.0 mm.
  • Supplied in rolls of 100, 120, 150 and 200 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile C1, that helps avoid improper sheet fixing, short life-time and low output that might occur during die cutting of cardboard.

We recommend using it when working with one-layer cardboard provided that the die cutting tool has 2-point cutting rules, especially in nicking areas.

Attach profile C1 to the surface of die cutting tool close to cutting rules. The usage of an adjusting step helps keep the necessary distance to the cutting rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will advise and supply all you need as soon as possible.

Profile C2
Profile C2
Profile C2

Specifications:

  • Hardness:
    20, 25, 30, 40, 50 and 70 units by Shore A.
  • Dimentions:
    9.5х10.5 mm, 10.0х11.5 mm, 11.0х12.0 mm.
  • Supplied in rolls of 30 and 70 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile C2, it helps avoid improper sheet fixing, short life-time, fluffy cutting line and low output that might occur during die cutting of corrugated board packaging.

We recommend using it when working with high quality corrugated board provided that the die cutting tool has 3-point rules, especially in the nicking areas. Another reason to use this profile is a large number of creasing rules on a die cutting tool, as these rules create additional tension that might even result in tearing. For three-layer corrugated board please use the profile 11 mm high and 20, 25, 30 and 50 Shore A hadr. For five-layer corrugated board, please use a profile 9,5-10 mm high and 70 Shore A hard.

Attach profile C2 to surface of the die cutting tool close to cutting rules. The use of an adjusting step helps keep the necessary distance to cutting rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile C3
Profile C3
Profile C3

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    7.00х12.50 mm, 7.50х12.50 mm.
  • Supplied in rolls of 30m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile C3. Combined with creasing matrix of matching size, it will provide excellent creasing along the flute direction.

We recommend using it when working with corrugated board provided that the die cutting tool has 3-point cutting rules along with creasing matrices.

Attach profile C3 to the surface of die cutting tool close to creasing rules. The profile should be 0.5-1.0 mm lower then the matching creasing rule.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile D1
Profile D1
Profile D1

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    5.0х7.0х6.0 mm, 5.0х8.0х7.0 mm, 5.0х9.0х8.0 mm, 5.0х10.0х9.0 mm, 5.0х11.0х10.0 mm.
  • Supplied in rolls of 80 and 100 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile D1 to get a clear and even perforated edge on the corrugated board and prevent the upper layer from tearing off during perforating flaps.

We recommend using it when working with three-layer corrugated board provided that the die cutting tool has perforating and crease/cutting rules.

Attach profile D1 close to the rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile D2
Profile D2
Profile D2

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    9.0х6.0х12.0 mm.
  • Supplied in rolls of 60 m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile D2 to get a clear and even perforated edge on the corrugated board and prevent the upper layer from tearing off during perforating flaps.

We recommend using it when working with five- and seven-layer corrugated board provided that the die cutting tool has perforating and crease/cutting rules.

Attach profile D2 close to rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile D3
Profile D3
Profile D3

Specifications:

  • Hardness:
    30, 40 and 50 units by Shore A.
  • Dimentions:
    14.0х10.0 mm, 14.0х14.0 mm.
  • Supplied in rolls of 20 and 25 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile D3, an alternative to the well-known cellular polyurethane profiles. The profile ensures hight-quality rotary die cutting.

We recommend using it during rotary die cutting of corrugated cardboard packaging.

Attach profile D3 close to the rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile E1
Profile E1
Profile E1

Specifications:

  • Hardness:
    55, 60 and 70 units by Shore A.
  • Dimentions:
    6.0х20.0 mm, 6.5х20.0 mm, 7.0х20.0 mm, 7.5х20.0 mm, 8.0х20.0 mm, 8.5х20.0 mm, 9.0х20.0 mm, 9.5х20.0 mm, 10.0х20.0 mm, 10.5х20.0 mm.
  • Supplied in rolls of 20 and 25 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile E1 to avoid improper sheet fixing and upper layer crushing during the die cutting of the corrugated board packaging.

We recommend using it with a wide range of creasing rules during the die cutting of three- and five-layer corrugated board. It can be used to manufacture flatbed and rottary die cutting tools.

Attach E1 profile to the surface of die cutting tool with glue or staples close to or 1 mm away from the creasing rules (depending on the type of the ruler and the thickness of its baseplate). The profile should be 0,5-1 mm lower than the creasing rule.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile E2
Profile E2
Profile E2

Specifications:

  • Hardness:
    55, 60 and 70 units by Shore A.
  • Dimentions:
    9.0х10.0 mm, 9.5х10.0 mm, 10.0х10.0 mm.
  • Supplied in rolls of 20 and 25 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile E2 to avoid improper sheet fixing and upper layer crushing during the die cutting of a corrugated board packaging.

We recommend using it with a wide range of creasing rules during the die cutting of three- and five-layer corrugated board in case the use of profile E1 is limited or too difficult. It can be used to manufacture flatbed and rotary die cutting tools.

Attach profile E2 to the surface of the die cutting tool with glue or staples 1 mm aways from the creasing rules (depending on a type of the rule and thickness of its baseplate). The profile should be 0.5-1 mm lower then the creasing rule.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile F1
Profile F1
Profile F1

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    7.2х5.0 mm, 11.0х5.0 mm.
  • Supplied in rolls of 50 m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile F1 that helps remove waste from inaccessible narrow areas, and also decrease excessive tension of cardboard or corrugated board. This prevents tearing of cardboard or corrugated board.

We recommend using it when working with the die cutting tools between rules for cardboard and corrugated board. It is especially efficient in the cases when the distance between the creasing matrices and cutting rules is about 10 mm, where it compresses the material and provides high-quality creasing and cutting.

Attach profile F1 between the rules set about 6 mm away from each other.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile G1
Profile G1
Profile G1

Specifications:

  • Hardness:
    65 Shore A.
  • Dimentions:
    7.0х7.0 mm, 10.0х11.0 mm.
  • Supplied in rolls of 70 m and 100 m (depending on a size).
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed rubber profile G1 that helps avoid improper sheet fixing, short life-time, fluffy cutting line and low output that might occur during die cutting of corrugated board packaging. Can be used as an alternative to cork profiles.

We recommend using it when working with caкdboard or corrugated board close to cutting rules, espeсially in nicking areas.

Attach profile G1 to surface of the die cutting tool 1mm away from cutting rules. The use of an adjusting step helps to keep the necessary distance to the cutting rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Profile G2
Profile G2
Profile G2

Specifications:

  • Hardness:
    70 Shore A.
  • Dimentions:
    7.0х8.0 mm.
  • Supplied in rolls of 100 m.
Warranties and customer protection
  • Exchange and refund within 14 days
  • Insurance for order delivered
  • Manufacturer warranty

Product description:

We offer a custom designed profile G2, a variation of profile G1 with a different size, shape and hardness. A custom round shape of this profile lowers the likelihood of sheet capture and ensures better transportation.

We recommend using it when working with cardboard or corrugated board close to cutting rules, espeсially in nicking areas.

Attach profile G2 to the surface of the die cutting tool 1mm away from cutting rules. The use of an adjusting step helps keep the necessary distance to the cutting rules.

The usage of PerForm profiles allows:

  • reduce the number of customer complains about a die cutting quality;
  • minimize maintance downtime and avoid extra duties for a production staff
  • release time for sales development and multiply your funds.

Do you have any more questions? Contact us. We will provide guidance and deliver all the materials you need as soon as possible.

Contacts

Do you have any questions? Please feel free to contact our professional team by filling in the form or calling us. We will be happy to help you solve any technical issue or choose the right equipment, spare parts, and consumables for your production.

Address:

Per Form Solutions Sp.z o.o.

Plac Wolnica 13 lok. 10, 31-060 Kraków

NIP: 6762602203

Phone:

+48 12 88 11 564

Loading
Your message has been sent. Thank you!